Shopping Cart
The Chilli Pro Sun Reaper stunt scooter is suitable for both beginners and experienced riders. A new addition to the latest collection, it stands out for its versatility. It features a wide chromoly handlebar, one-piece alloy wheel cores and high-quality wheels.
- Handlebar: XL t-bar 4130 CrMo steel (58 x 58 cm)
- Clamp: 3-bolt clamp, 6061 aluminium, HIC
- Compression: spider HIC system
- Deck: 6061 aluminium (50 x 11.5 cm)
- Wheels: 110 mm spoke wheels, aluminium core, 90A
- Bearings: ABEC 9
- With brake
- Height: 84 cm
- Weight: 3.8 kg
STUNT SCOOTER RULES OF USE
Safety precautions
As with any other moving device, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following advice:
- Always wear protective equipment such as an ANSI, SNELL, CPSC or ASTM certified helmet, knee and elbow pads, a long-sleeved shirt and long trousers.
- Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or wearing sandals.
- Always follow the applicable traffic and scooter-riding rules. Watch out for other vehicles and give way to pedestrians.
- Do not make any changes to the structure of the device and do not use any accessories that are not supplied with the scooter.
- Do not ride holding the device with only one hand. Hold the handles firmly with both hands.
- When riding, do not make sudden turns and do not lean your whole body on the handles in a turn, as they may twist and you may lose control.
- Do not ride the scooter on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. In the rain, wheel grip, braking and visibility conditions deteriorate.
- Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brake may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride downhill at high speed.
- Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on wet or icy surfaces.
- Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
- Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may heat up, so do not touch it after stopping, as you may burn yourself.
- Turn the scooter handlebar to the left and right and check that the mechanism works properly. Before you start riding, also make sure that the handles are firmly in place.
- Children must always ride under adult supervision. Before riding, the supervising person should check the scooter to ensure that all its parts are properly secured and to prevent an accident.
- Since fingers can get pinched when assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are firmly assembled.
- Failure to follow the safety advice above may result in injury.
- Promptly replace worn or broken parts of the device.
6-month warranty; the warranty does not cover wearing parts
The warranty is void if the device fails due to mechanical damage to the scooter, improper use or performing unauthorised manoeuvres with it.
CHECK BEFORE RIDING
First, check that the brakes work.
Second, check that the handles are properly and firmly in place.
Third, check that the wheels are firmly attached and rotate without obstruction.
Once you have checked everything and read the safety advice, you can start riding the scooter.
USER INSTRUCTIONS AND DEVICE MAINTENANCE
- Turn the scooter's wheels and handlebar to check that the bearings of the mechanisms work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
- It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure you order the correct part from the supplier (dealer).
- If the front part of the scooter (handlebar) is loose, the handlebar column mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the compression bolt with a hex key. Reinstall the handlebar and firmly tighten the handlebar clamp.
- Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that it is safe to ride.
- With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Unscrew the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings, then firmly retighten the nuts with a wrench on both sides of the wheel. Make sure you order the correct wheels or wheel bearings from the supplier (dealer).
- Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften the stickers or their adhesive.
- Before you start riding, make sure all parts are firmly assembled.
- Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, contact the supplier (dealer) or importer and replace the mechanisms or parts with new ones.
