Shopping Cart
The Chilli Pro Rocky stunt scooter is designed for beginner riders getting to know simple tricks. This updated model features a more reliable headset bearing system and stands out with excellent equipment at a modest price and a distinctive design. It has a reliable chromium-molybdenum alloy handlebar, one-piece alloy rims and high-quality wheels.
- Handlebar: 4130 CrMo steel (58 x 58 cm)
- Clamp: 2-bolt CNC aluminium HIC clamp
- Compression: Universal HIC system
- Deck: 6061 aluminium (50 x 11.5 cm)
- Wheels: 110 mm spoke wheels, aluminium core 90A
- Bearings: ABEC 9
- With brake
- Height: 79 cm
- Weight: 3.5 kg
STUNT SCOOTER RULES OF USE
Safety measures
As with other moving devices, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following tips:
- Always wear protective gear, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow pads, a long-sleeved shirt and long trousers.
- Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or in sandals.
- Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
- Do not make any changes to the structure of the device and do not use any accessories not supplied with the scooter.
- Do not ride holding the device with only one hand. Hold the handles firmly with both hands.
- When riding, do not make sudden turns and do not lean on the handles with your whole body in a turn, as they may twist and you may lose control.
- Do not ride the scooter on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. In the rain, wheel grip, braking and visibility conditions deteriorate.
- Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brakes may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
- Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on wet or icy surfaces.
- Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop suddenly.
- Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may heat up, so do not touch it after stopping, as you may get burned.
- Turn the scooter handle left and right and check that the mechanism works properly. Before you start riding, also make sure the handles are held firmly.
- Children must always ride under adult supervision. Before riding, the supervising person checks the scooter to ensure all its parts are properly fastened and to prevent an accident.
- Since fingers can get pinched when assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or parts of the clamping mechanism to avoid injuring your fingers. Make sure all parts are firmly installed.
- If you do not follow the above safety tips, you may get injured.
- Promptly replace worn or broken parts of the device.
6-month warranty; the warranty does not cover wearing parts
The warranty is void if the device fails due to mechanical damage to the scooter, improper operation or performing prohibited manoeuvres with it.
CHECK BEFORE RIDING
First, check that the brakes work.
Second, check that the handles are properly and firmly held.
Third, check that the wheels are firmly held and rotate without disturbance.
Once you have checked everything and read the safety tips, you can start riding the scooter.
USER INSTRUCTIONS AND DEVICE MAINTENANCE
- Turn the scooter wheels and handlebar to check whether the bearings of the mechanisms work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
- It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
- If the front part of the scooter (handlebar) is loose, the headset mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the headset compression bolt with a hex key. Refit the handlebar and firmly tighten the handlebar clamp.
- Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that riding is safe.
- With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Unscrew the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench on both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
- Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften the stickers or their adhesive.
- Before you start riding, make sure all parts are firmly installed.
- Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, contact the supplier (representative) or importer and replace the mechanisms or parts with new ones.
