Shopping Cart
Stunt scooter developed in collaboration with the legendary Archie Cole and designed for experienced riders. The scooter is based on the popular Reaper model, which has been adapted to a new build, making the final result nearly 400 grams lighter. All parts are made from high-quality aluminium alloy.
- Handlebar: AL6061-T6 (61 x 58 cm)
- Clamp: 2-Bolt CNC Aluminium
- Compression: Chilli Spider HIC
- Deck: AL6061-T6 Aluminium (50 x 11.5 cm)
- Wheels: 110 mm, full core 90A
- Bearings: ABEC 9
- With brake
- Height: 86.5 cm
- Weight: 3.44 kg
STUNT SCOOTER USAGE RULES
Safety measures
As with other moving devices, riding a scooter can be dangerous. Before riding, read all the usage rules. Pay particular attention to the following advice:
- Always wear protective gear, such as an ANSI, SNELL, CPSC or ASTM certified helmet, knee and elbow protection, a long-sleeved shirt and long trousers.
- Always wear closed footwear and make sure it is properly fastened. Do not use the scooter barefoot or in sandals.
- Always follow the applicable traffic and scooter-riding rules. Watch out for other vehicles and give way to pedestrians.
- Do not make any changes to the structure of the device and do not use any accessories that are not supplied with the scooter.
- Do not ride holding the device with only one hand. Hold the handles firmly with both hands.
- When riding, do not make sudden turns and do not lean on the handles with your whole body in a turn, as they may twist and you may lose control.
- Do not ride the scooter on a slippery or wet road surface, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces wheel grip, braking and visibility.
- Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brakes may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
- Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
- Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
- Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may heat up, so do not touch it after stopping, as you may burn yourself.
- Turn the scooter handle to the left and right and check that the mechanism works properly. Before you start riding, also make sure the handles are firmly in place.
- Children must always ride under adult supervision. Before riding, the supervising person should check the scooter to ensure all its parts are properly secured and to prevent an accident.
- Since fingers can be pinched while assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are firmly mounted.
- Failure to follow the safety advice above may result in injury.
- Promptly replace any worn or broken parts of the device.
6-month warranty; the warranty does not cover wearing parts
The warranty does not apply if the device fails due to mechanical damage to the scooter, improper use or performing prohibited manoeuvres with it.
CHECK BEFORE RIDING
First, check that the brakes work.
Second, check that the handles are properly and firmly in place.
Third, check that the wheels are firmly secured and spin without disturbance.
After checking everything and reading the safety advice, you can start riding the scooter.
USER INSTRUCTIONS AND DEVICE MAINTENANCE
- Turn the scooter wheels and handlebar to check whether the mechanism bearings run smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
- It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
- If the front of the scooter (handlebar) is loose, the head tube mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the compression bolt of the head tube with a hex key. Reinstall the handlebar and firmly tighten the clamp.
- Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that it is safe to ride.
- With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly tighten the nuts with a wrench from both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
- Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
- Before you start riding, make sure all parts are firmly mounted.
- Mechanisms or parts may work less well over time. If any mechanism or part does not work as it should, it is recommended not to use the device, to contact the supplier (representative) or importer and to replace the mechanisms or parts with new ones.
