Chilli Pro Critter Hercules Beetle Stunt Scooter

Distinctive-looking Chilli Pro Critter stunt scooter, aimed at intermediate and experienced riders. Standing out for its versatility, this scooter is suitable for both park and street.

• Handlebar: T-bar strengthened steel (64 x 58 cm)
• Clamp: 2-bolt clamp, 6061 aluminium HIC
• Compression: spider HIC system
• Deck: 6061 aluminium (50 x 11.5 cm)
• Wheels: 110 mm spoke wheels, aluminium core, 88A
• Bearings: ABEC 9
• With brake
• Height: 88 cm
• Weight: 3.8 kg

STUNT SCOOTER USAGE RULES

Safety measures

As with other moving devices, riding a scooter can be dangerous. Before riding, read all the usage rules. Pay particular attention to the following tips:

1. Always wear protective equipment, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow protection, long-sleeved shirts and long trousers.
2. Always wear closed footwear and make sure it is properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the device's construction and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the handles firmly with both hands.
6. When riding, do not make sharp turns and do not lean your whole body on the handles in a turn, as they may twist and you may lose control.
7. Do not ride on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces wheel grip, braking and visibility.
8. Do not ride on steep slopes, as the scooter may become uncontrollable or the brakes may not work sufficiently. Be especially careful on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before riding, press the brake pedal and check that it works. With prolonged use, the brake pedal may heat up, so do not touch it after stopping, as you may burn yourself.
12. Turn the scooter handlebar left and right and check that the mechanism works properly. Before riding, also make sure the handles are firmly in place.
13. Children must always ride under adult supervision. Before riding, the supervising person checks the scooter to ensure all its parts are properly fastened and to prevent accidents.
14. Since fingers can be pinched when assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are firmly mounted.
15. If you do not follow the safety tips above, you may be injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not apply to wearing parts

The warranty is void if the device fails due to mechanical damage of the scooter, improper use or performing prohibited manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the handles are properly and firmly in place.

Third, check that the wheels are firmly attached and rotate without disturbance.

After checking everything and reading the safety tips, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the scooter's wheels and handlebar to check that the mechanism bearings work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
3. If the front part of the scooter (handlebar) is loose, the steerer clamp mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the compression bolt with a hex key. Reinstall the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so you can ride safely.
5. With regular use, the wheels and wheel bearings may wear out. They can be easily replaced. Unscrew the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench on both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust from the scooter with a damp cloth. Do not use cleaners or thinners that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before riding, make sure all parts are firmly mounted.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device and to contact the supplier (representative) or importer to replace the mechanisms or parts with new ones.