Chilli Pro Critter Chameleon Stunt Scooter

The Chilli Pro Critter is a stunt scooter with a distinctive style, aimed at intermediate and experienced riders. Standing out for its versatility, this scooter is suitable for both the skatepark and the street.

• Handlebar: T-bar strengthened steel (64 x 58 cm)
• Clamp: 2-bolt clamp, 6061 aluminium, HIC
• Compression: spider HIC system
• Deck: 6061 aluminium (50 x 11.5 cm)
• Wheels: 110 mm spoke wheels, aluminium core, 88A
• Bearings: ABEC 9
• With brake
• Height: 88 cm
• Weight: 3.8 kg

RULES FOR USING THE STUNT SCOOTER

Safety measures

As with any other moving device, riding a scooter can be dangerous. Before riding, read all the instructions for use. Pay particular attention to the following advice:

1. Always wear protective gear, such as an ANSI, SNELL, CPSC or ASTM certified helmet, knee and elbow protection, a long-sleeved shirt and long trousers.
2. Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the structure of the device and do not use any accessories that were not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding the scooter, do not make sudden turns and do not lean on the grips with your whole body in a turn, as they may twist and you could lose control.
7. Do not ride the scooter on a slippery or wet road surface, as the polyurethane wheels may slip and you could lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces the wheels' grip on the road surface as well as braking and visibility.
8. Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brake may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Only ride the scooter on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on wet or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal can heat up, so do not touch it after stopping, as you could burn yourself.
12. Turn the scooter's handlebar left and right and check that the mechanism works properly. Before you start riding, also make sure the grips are firmly attached.
13. Children must always ride under adult supervision. Before riding, the supervising person should check the scooter to ensure that all its parts are properly attached and that accidents are avoided.
14. Since fingers can get pinched when assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or clamp mechanism parts, so as not to injure your fingers. Make sure all parts are firmly assembled.
15. If you do not follow the safety advice above, you may get injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not cover wearing parts

The warranty is void if the device fails due to mechanical damage of the scooter, improper use or performing prohibited manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the grips are properly and firmly attached.

Third, check that the wheels are firmly attached and spin without interference.

Once you have checked everything and read the safety advice, you may start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the scooter's wheels and handlebar to check whether the mechanism bearings run smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamp bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
3. If the front part of the scooter (the handlebar) wobbles, the fork/steering tube mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the compression bolt with a hex key. Reinstall the handlebar and firmly tighten the clamp.
4. The polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that riding is safe.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench on both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or thinners that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before you start riding, make sure all parts are firmly assembled.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, to contact the supplier (representative) or importer and to replace the mechanisms or parts with new ones.