Chilli 3000 Shredder Stunt Scooter

Chilli Pro 3000 stunt scooter, designed for young riders. An excellent choice when you are looking for the most reliable of the smaller scooters. A wide handlebar made of chromium-molybdenum alloy, one-piece alloy wheel cores and high-quality wheels.

Suitable for children up to 140 cm tall.

• Handlebar: Y-bar 480mm H x 480mm W
• Clamp: 3-bolts clamp CNC aluminium
• Compression: Universal HIC
• Deck: 6061 aluminium (45 x 11.5 cm)
• Wheels: 100mm spoke wheels, aluminium core 90A
• Bearings: ABEC 9
• With brake
• Height: 70 cm
• Weight: 3.1 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with the use of other moving devices, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following tips:

1. Always wear protective equipment, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow protection, long-sleeved shirts and long trousers.
2. Always wear closed footwear and make sure it is properly fastened. Do not use the scooter barefoot or wearing sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the device's construction and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding the scooter, do not make sudden turns and do not lean on the grips with your whole body in a turn, as they may twist and you may lose control.
7. Do not ride the scooter on a slippery, wet road surface, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces the wheels' grip on the road and worsens braking and visibility conditions.
8. Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brakes may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, rocky or gravel surfaces. Do not ride the scooter at dusk or at night, on wet or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may become hot, so do not touch it after stopping, as you may get burned.
12. Turn the scooter's handlebar to the left and right and check that the mechanism works properly. Before you start riding, also make sure that the grips are firmly held.
13. Children must always ride under adult supervision. Before riding begins, the supervising person checks the scooter to ensure that all its parts are properly secured and to avoid an accident.
14. Since fingers can get pinched when assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or the parts of the clamping mechanism, so as not to injure your fingers. Make sure all parts are firmly assembled.
15. If you do not follow the safety tips above, you may get injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not apply to wearing parts

The warranty is void if the device fails due to mechanical damage to the scooter, improper use or performing prohibited maneuvers with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the handlebar is properly and firmly secured.

Third, check that the wheels are firmly attached and spin without disturbance.

Once you have checked everything and read the safety tips, you can start riding the scooter.

USER MANUAL AND DEVICE MAINTENANCE

1. Turn the scooter's wheels and handlebar to check whether the mechanisms' bearings work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping screws.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure you order the correct part from the supplier (representative).
3. If the front part of the scooter (handlebar) is wobbly, the steering tube mechanism is most likely not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the compression screw with a hex key. Reinstall the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out after some time. Contact the seller and replace them with new ones so that it is safe to ride.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly tighten the nuts again with a wrench on both sides of the wheel. Make sure you order the correct wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust from the scooter with a damp cloth. Do not use cleaners or thinners that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften the stickers or sticker adhesive.
7. Before you start riding, make sure that all parts are firmly assembled.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, to contact the supplier (representative) or importer and replace the mechanisms or parts with new ones.